Apollo Intelligent Meter Series IMY Manual do Utilizador descarregar pdf (Página 11)

MODULE #3 - PROGRAM FUNCTIONS ACCESSIBLE W/ FRONT PANEL LOCKOUT

This programming module programs what is accessible through the front

panel when the PGM. DIS. pin is connected to common (COMM.).

Note: The term “Quick Programming” is used to refer to the ability to change the

information that can be accessed from the front panel when the “PGM. DIS.”

terminal is connected to “COMM.”.

DISPLAY ALARM VALUES

If the alarm option is installed, this selects whether the alarm values will or

will not be displayed.

“dSP AL” < > “yES” or “NO”

ENTER ALARM VALUES =

If “YES” was selected for display alarm values, this will select if alarm

values may be modified from the front panel. (If “NO” was selected for

display alarm values, then this step will default to “NO” and will not be

displayed for selection.)

“ENt AL” < > “yES” or “NO”

DISPLAY HYSTERESIS VALUES

If the alarm option is installed, this selects whether the hysteresis values

will or will not be displayed.

“dSPHYS” < > “yES” or “NO”

ENTER HYSTERESIS VALUES =

If “YES” was selected for display hysteresis values, this selects whether

hysteresis values may be modified from the front panel. (If “NO” was

selected for display hysteresis value, then this step will default to “NO” and

will not be displayed for selection.)

“ENtHYS” < > “yES” or “NO”

= Note: This sequence may be locked-out due to other programmed sequences.

* Note: This function operates independent of the state of the “PGM. DIS.” pin.

RESET LATCHED ALARMS

If the alarm option is installed and if either alarm is programmed to latch,

this will select if a latched alarm(s) can be reset from the front panel.

“rSt AL” < > “yES” or “NO”

DISPLAY PEAK/VALLEY MEMORY BUFFER

If the integrator/totalizer option is installed, this selects whether peak and

valley buffers will be displayed.

“dSPbUF” < > “yES” or “NO”

RESET PEAK/VALLEY MEMORY BUFFER =

If “YES” was selected for the previous step, this selects whether the peak

and valley buffers may be reset from the front panel. (If “NO” was selected,

then this step defaults to “NO” and will not be displayed for selection.)

“rStbUF” < > “yES” or “NO”

SELECT DISPLAY*

If the integrator/totalizer option is installed, this selects whether the

display can be switched from input display to total display and from total

display to input display.

Note: When “NO” is selected, whatever display (Input or total) is shown, will be

the only display accessible.

“SELdSP” < > “yES” or “NO”

RESET TOTAL*

If the integrator/totalizer option is installed, this selects whether the total

can be reset from the front panel.

“rSttOt” < > “yES” or “NO”

-9-

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comentários a estes Manuais

Sem comentários

Apollo Intelligent Meter Series IMY Manual do Utilizador Página 11

Comentários a estes Manuais