Apollo SL60 Guia do Utilizador descarregar pdf (Página 86)

3. Turn the Small knob to select the speed value,

“At Power On,” or “OFF” and then press ENT.

Direct-To Entry Options

When you use Direct-To, the Active flight plan

(and the From, To, Next information) is

automatically updated.

If you use Direct-To to center the CDI needle for

the current “To” waypoint, or skip past the To

waypoint to another waypoint already in the Active

flight plan, the current leg number of the Active

flight plan will be updated, if needed, so that the

Direct-To waypoint matches the current “To”

waypoint. In these cases, the Direct-To Entry

Option is not a factor.

The Direct-To Entry Option becomes a factor if you

go Direct-To a waypoint which is not in the Active

flight plan.

With the May Clear Direct-To Entry Option, the

Direct-To waypoint will be inserted in the Active

flight plan, and all of the other waypoints will be

deleted from the Active flight plan.

With the Never Clears Direct-To option, the

Direct-To waypoint is inserted before the current

To waypoint.

The May Clear option is useful for the pilot who

uses the Direct-To function for the majority of

flight planning, and doesn’t want to be bothered

with a steadily increasing number of waypoints in

the Active flight plan. The Never Clears option is

useful when you need to vector off from the Active

flight plan’s path temporarily, resuming the

previously entered flight plan at a later time, such as

for a “cleared direct to the xyz VOR, rest of route

unchanged” type of clearance.

The default setting for the Direct-To Entry is Never

Clears. The Apollo SL50/60 retains the last

ENT

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 136 137

Sem comentários

Apollo SL60 Guia do Utilizador Página 86