Apollo HD Series Manual do Utilizador descarregar pdf (Página 8)

PAN/TILT/ZOOM

This section details settings for the PTZ controls for cameras.

Channel selects the camera, protocol and baud rate are the primary controls for a PTZ camera, please refer to your camera

instructions for Protocol and Baud rate to use, the DVR’s settings should match the cameras. Once this has been done you will

be able to control a connected PTZ via the right click PTZ menu on the main screen.

Please be aware that the DVR require the PTZ control cables to be plugged into the back of the DVR for this to work, on the

green relay ports at the rear of the device Port A is for Positive and Port B is for negative.

DISPLAY

This section controls the display settings for the DVR, covering the display type (BNC or VGA) and resolution. The display setting

also has the options for the tour feature. Simply highlight which camera displays you wish the DVR to tour through and the delay

between switching pictures and highlight enable.

DEFAULT

This section returns all highlighted Settings menu entries to their default values

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Apollo HD Series Manual do Utilizador Página 8